The useful life of the products and their components could be affected by solicitations received during the packaging phase, transportation and depot operations in general which could determine a failure caused by arising defects not visible or predictable in the production phase. Moreover, the environment in which the products «operate» is affected by sudden temperature variations, which often generate quality problems. ACS, thanks to its wide experience, has developed a huge range of products to test different type of specimen on different application fields, to detect unpredictable future defects and to verify the specimen behaviour under controlled temperature and humidity variations.
E-Eco series The Discovery ”E” series chambers have the essential environmental chamber performances and are specifically designed for general purpose applications where extremely high temperatures or fast ramp rates are not required. The “E“ series is ideal for climatic tests at steady states. It is ideal for a wide range of applications such as Tropical tests on Pharmaceutical products, and for wide range of tests in the plastics, rubber, paper and semiconductor industries.
ES-Environmental Screening series The Discovery “ES” series now has even more environmental performance, whilst maintaining the same footprint and volume of the lower specification versions. Discovery “ES” has been designed for Environmental Stress and is ideal for reliability growth processes where temperature changing rate of 5 Degrees a minute are required. All of the chambers in the “ES” range are equipped with air condensers, except for the 340 l model where water condensation is required to maintain a compact foot print.
CLIMATIC AND THERMOSTATIC MODELS
CLIMATIC AND THERMOSTATIC MODELS
DM340 (T) DM600 (T) DM1200 (T) DM1600 (T)
DM340 E DM600 E DM1200 E DM1600 E
DM340 (T) ES DM600 (T) ES DM1200 (T) ES
DM340 C (T) DM600 C (T) DM1200 C (T) DM1600 C (T)
DM340 C (T) ES DM600 C (T) ES DM1200 C (T) ES
Please click on the following link to open the interested datasheet.
Control and management system and interfaces Controlled by PLC and Advanced HMI
Remote access There is a wide range of possibilities thanks to the built-in MyKratos™ and MyAngel24™; multichamber control also available upon request
Electromagnetic closing system Ensures the security of environmental tests
Air treatment system Ensures a precise control of the climatic parameters inside the chamber with minimal thermal inertia; an axial fan allows rapid temperature variations of both air and specimen.
Humidification system (only climatic version) The humidifier with a self-contained heater and dedicated controlling S/W offers two great advantages: - it does not require distilled or demineralised water to operate properly - it uses ‘dry’ vapour in order to avoid condensation on the specimens and to reproduce real environmental conditions
MyKratos™ and MyAngel24™: top of the line HMI for remote control
Inspection window: multiple-crystal, with double heated transparent film, 550h X 450 mm size
Self feeding system (tap water through chamber embedded softener)
Wheels and feet
Electromagnetic closing system
Silicone portholes: 80 mm (left side) and 150 mm diameter (right side) fitted with silicone cap. They allow internal-external electrical, mechanical or hydraulic connections
Digital min./max. thermostat: with independent probe
No. 1 internal grid shelf
Auxiliary contacts (specimens, alarms)
Additional portholes: 80 and 150 mm
Water condenser: for the chambers which are normally equipped with air condenser
UV lamp: for ageing tests on painted surfaces, plastic materials, rubber, etc
Handling port hole: Ø125 mm, positioned on the door near the inspection window. It allows handling specimens inside the chamber (available for models from 500 litres up)
Internal shelves: AISI 304 stainless steel, adjustable in height, grid shelves to be added to the one supplied
Reinforced floor: max 500 kg distributed load
Set of no. 4 analogic inputs 0÷10V for user’s data acquisition (no. 1 set max)
Set of no. 4 PT100 inputs (no. 1 set max)
Set of no. 4 PT100
Set of no. 8 auxiliary contacts (no. 1 set max)
No break power unit for PLC
Compressed air dehumidification kit
Capacitive probe: RH Controlling and monitoring (activated by control system)
Temperature and Humidity (for climatic chambers) analogic retransmission
Temperature extension to +200°C
Air fan motor speed adjustment
Specimen switching off in case of chamber alarm
Air flow booster
Tablet Samsung or compatible
MyKratos™ Multichamber: software, installed on a PC, for monitoring and control multiple chambers
Max. load of the shelf 50 kg approx. (equally distributed)
Internal test space is made of stainless steel (material 1.4301, equivalent of AISI 304)
All seams are TIG welded and vapour tight
AIR TREATMENT SYSTEM
System includes the following components:
Dehumidification system (only climatic version)
Thermoregulation air circulation fan
Temperature and humidity probe
Mechanical cooling based on single stage system (-40°C) or cascade systems (–70°C). The cooling system is realized with semi-hermetic alternative type compressors including an automatic injection-type protection system. This protects the compressors when they are cooling down from high temperatures.
The chamber is heated by means of electrical heaters, protected by safe thermostats that disconnect overall chamber main power components (such as compressors, fans and heaters) in case of accidental over-temperature.
HUMIDIFICATION AND DEHUMIDIFICATION (climatic models)
Direct humidification occurs through an electrical vapour humidifier. The chamber is equipped with a water storage tank (about 18 l capacity) and a water connection on the back of the chamber for automatic refilling. There are three ways to ensure the water supply needed for any kind of climatic tests:
Connecting the chamber to normal tap water network by means of suitable water connection
Manually refilling the tank with demineralised water
Connecting the chamber to demineralised network
In order to reduce water consumption, water recycling can be activated through a button on the control panel (only possible when the specimen does not contaminate the water during the test). Dehumidification is performed by the condensation cooler (dew point cooler) directly connected to the refrigeration circuit. This principle permits high stability of parameters in conjunction with energy-efficient dehumidification.
Temperature Measurement with Pt100 thermal probe Class A, max precision 0,3K. Relative humidity measurement with Assmann psychrometric system complete with Pt100 thermal probes. Relative Humidity range from 10% to 98% within the temperature range [+10°C; +95°C].
Dew Point range:
AREA 1, from +4°C to +94°C for continuous tests
AREA 2, down to -3°C for limited periods based on starting conditions and foreseen testing time
The values refer to the basic version at ambient temperature of +22°C, with temperature and humidity measurement made in the air inlet.
CONTROL SYSTEM AND USER INTERFACE
The chamber is equipped with a PLC (Programmable Logic Controller) for managing all the chamber’s functions and safety interlocks. The HMI system consists of an on-board panel (Keykratos Evo) and a remote control (MyKratos™ including MyAngel24™) connected to the chamber.
On-Board Panel (Keykratos Evo) consists of 3.5 inch Analog Touch Panel 65,536 colours with a touch menu with related pop up screens, allowing the following activities: main chamber's parameter setup, manual control, possbility to start the last stored profile, visualization of eventual alarm notifications.
MyKratos™ control software makes it possible to manage, monitor and assist the chamber anywhere, at any time, in multiple ways (Wi-Fi, Ethernet, mobile network) via mobile and desktop devices. The chamber wireless (Wi-Fi) connection permits operation using tablets and smartphones (iOS 8 or Android 4.2.1 compatible). The operator interface can also be remotely accessed through a chamber connection to the client’s LAN or via mobile network (on activation of SIM card data). It includes the MyAngel24™ remote-assistance system.
MyAngel24™ is an online diagnostic and remote servicing system included in the chamber basic configuration, activation is possible on Customer demand. Once activated, Angelantoni Server acquires data coming from the chamber, allowing ACS Service Staff to grant a remote assistance 24h. ACS service staff can identify the problem and if possible, solve it remotely, or at least identify parts that may need to be replaced and check their stock availability in order to schedule an utmost efficient on-site intervention.
Control System - main features
Visualization and graphical analysis of measures and recordings
Synoptic graphs of the entire system
High configurability of chamber parameters
Unlimited possibilities of measures recording
Program and Manual mode of chamber operation
Delayed start of a program
Automatic notifications of event and alarms
Ability to send email notification to various recipients via customer's LAN connection
Live data update of measures on the charts
Graphic charts or numeric table representation views on the monitor
Graphic cursor for in-chart data measurements and evaluations
Calculation of Measure Slopes and report generation
Enable/disable of chart display
Zoom in, zoom out and scroll functions
Export function to convert the MyKratos™ log file into ASCII format (usable in Excel or other applications)
Please select from the list the desired features to define the standard configuration; add the accessories if needed; fill the form with your contact data and forward the quotation request.
In case you don’t have detailed info to fill all the fields, please select at least one field and fill the free space with some notes; you will be contacted from our sales network who will help you to select the most proper chamber to meet you requests.